24-Port 10/100M and 2-Port Gigabit Unmanaged Switch with 2 Combo SFP Slots
The ECOM S1526F 24-port 10/100M and 2-port gigabit unmanaged switch is specially developed for the cybercafé, workgroup, as well as small and medium enterprises to realize network interconnection.
Designed with 24 10/100M auto-negotiation RJ45 ports and 2 gigabit uplink RJ45/SFP (mini GBIC) multiplexed ports, this unmanaged Ethernet switch increases bandwidth for client connection and reduces access latency, meeting the requirement of transmitting data at high load. All ports support full wire-speed, non-blocking switching and auto MDI/MDIX.
1. Strong Compatibility
Through the 24 10/100M auto-negotiation ports, our unmanaged switch can combine all 10 or 100 Mbps network devices in the same network together.
2. Flexible Extension
Owing to the 2 gigabit uplink RJ45/SFP (mini GBIC) multiplexed ports, users can have their network connected to the backbone network easily. Also, users can choose the RJ45 port or SFP port according to the actual needs.
If users choose the gigabit RJ45 port, the existing copper cables can be directly used as the transmission media, thus saving the high cost to purchase the optical fibers. Also, users can select the SFP (mini GBIC) port. By choosing the optical fiber supporting short, medium, or long transmission distance, users' requirements on different transmission distance can be easily satisfied.
When the SFP port and the corresponding multiplexed RJ45 port are chosen at the same time, the former has higher priority.
3. Superior Performance
a. Both the 24 10/100M RJ45 ports and the 2 gigabit RJ45/SFP multiplexed ports are able to automatically adapt to full-duplex or half-duplex mode, so a maximum bi-directional transmission rate of 200Mbps and 2000Mbps can be achieved respectively.
b. The MAC address self-learning function can ensure error-free transmission of data.
c. The store and forward switching mode can prevent the damaged data packet spreading in the network.
d. Our unmanaged switch has port traffic control function, so the impact caused by instantaneous large amounts of data on the network can be prevented, thus ensuring efficient and stable network operation.
4. Plug and Play
The unmanaged switch with 2 combo SFP slots requires no settings before using. It can work normally after powered on. In addition, users don't have to worry about the cable type, as each port of our network switch supports auto-MDI/MDIX.
5. Easy Maintenance
Our unmanaged switch can fit in a 19-inch rack. The LED indicators on its front panel can dynamically show the device connection and running status, thus providing a simple troubleshooting method, making the device easy to maintain.
|Standards||IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x|
|Fixed Port|| 24 10/100M auto-negotiation RJ45 ports
2 gigabit uplink RJ45/SFP (mini GBIC) multiplexed ports
|Cable Type|| 10Base-T: Category 3/4/5 UTP, support maximum transmission distance of 100m
100Base-TX: CAT5 UTP, support maximum transmission distance of 100m
1000Base-T: CAT5e UTP, support maximum transmission distance of 100m
|Fiber Type|| 50/125µm multimode fiber, transmission distance of 550m
9/125µm single mode fiber, transmission distance of 10km
9/125µm single mode fiber, transmission distance of 40km
9/125µm single mode fiber, transmission distance of 80km
|LED Indicators||Power, Link/Act 1~26, Speed 1~26|
|MAC Address Table||8K|
|Forwarding Rate|| 10Mbps: 14880PPS
|Input Voltage||100V~240V AC, 50/60Hz|
|Power Consumption||< 15W|
|Operating Humidity||10%～90% RH, Non-condensing|
|Storage Humidity||5%～90% RH, Non-condensing|
|Cooling Mode||Natural cooling|